一、Clean Immediately After Use
【1】Basic Preparation
| Item | Tools |
| Cleaning | Warm water (30–40°C), rinsing bulb, or cleaning spray bottle |
| Cleaning Agents | Use a neutral antibacterial cleaner, a fragrance-free body wash, or a toy-safe foaming cleanser for gentle and effective cleaning. |
| dry | For drying, prepare an absorbent towel, a cool air hair dryer, a drying rod for internal areas, and dehydrating cotton swabs to ensure thorough moisture removal. |
[2] Internal Channel Cleaning Process (Core Steps)
Objective: Thoroughly remove bodily fluids and lubricant residues to prevent odors and bacterial growth.
Procedure:
-
Position the Toy: Place the full size torso sex doll horizontally with the channel facing up, or stand it upright with the channel facing down to drain fluids.
-
Rinse with Water: Use a rinsing bulb or spray bottle to inject warm water into the channel, repeating multiple times.
-
Apply Cleaner: Add neutral foaming cleanser into the channel and gently squeeze the toy to clean the inner walls.
-
Drain Residual Water: Lightly tap the surface or invert the torso to let dirty water flow out.
-
Repeat Rinsing Until No Foam Remains: Continue flushing with clean water until all foam and residues are completely rinsed out.
⚠️ Do Not Use: Boiling water, alcohol-based, or bleach-containing cleaners, as these can degrade the material.
【3】External Surface Cleaning
-
Wipe the outer skin, groin, inner thighs, and chest area with a damp cloth.
-
For folded areas (such as the navel or gluteal groove), use a soft-bristle brush for gentle cleaning.
-
Avoid excessive scrubbing with sponges, as they may shed fibers or leave debris on the surface.
二、Air-Drying and Dehumidifying Process
Internal Channel Drying
-
Use dehydrating cotton swabs or dry cloth strips to absorb moisture inside the channel.
-
Blow cool air into the channel for 10 minutes using a hair dryer with a narrow nozzle attachment.
-
Alternatively, place the female sex torso in a well-ventilated area and let it air-dry for at least 2 hours.
Surface Drying
-
Gently press and pat the surface with an absorbent towel; avoid rubbing back and forth.
-
Do not seal and store the toy immediately after wiping. Ensure the internal channel is completely dry first.
三、Material Maintenance Tips (For Extended Lifespan)
[1] Apply Powder to Prevent Stickiness (Highly Recommended for TPE/TPR Materials)
| Tools | Requirements |
| Body Powder | Fragrance-free, additive-free cornstarch or toy-specific maintenance powder |
| Tools | Gently pat the powder using gloves, covering all contact surfaces, especially the channel entrance and high-friction areas. |
❌ Strictly Prohibited: Talcum powder (may cause respiratory issues) and scented powders (can damage the material).
【2】Material Care Oil (For Advanced Users)
-
Suitable for TPE torso sex toys with surface dryness or minor cracks.
-
Apply medical-grade mineral oil or specialized maintenance oil evenly, then allow to air-dry.
-
A full conditioning treatment is recommended once every quarter.
四、Professional Storage Recommendations
✅ Ideal Environment
| Item | Instructions |
| Temperature | Room temperature (avoid exposure to high heat above 40°C) |
| Humidity | Low-humidity environment with proper ventilation |
| Keep Away from Light | Keep away from direct sunlight to prevent yellowing. |
| Storage Method |
Store separately in the original foam box or a breathable non-woven fabric bag. |
⚠️ Precautions
-
Do not place in contact with dark-colored fabrics or denim, as they may cause staining.
-
Do not store under heavy objects or fold the toy to prevent deformation.
-
Do not store together with other silicone toys to avoid material fusion.
